Offset Printing Plates

Orion Freedom Plus Thermal

freedom

Orion Freedom Plus Thermal CtP is designed especially for commercial printers. Excellent dot production can be achieved with Orion Freedom Plus Thermal. Stringent quality standards reduce the deviation in product quality, thereby achieving predictable results. Orion Freedom Plus Thermal is suitable for medium to long run jobs, giving print run of 100,000 without baking. Orion Freedom Plus Thermal gives best results when used with Orion TPD 010 developer. Cost of chemical per plate is reduced with the help of Orion TPD 010. This plate gives best quality at a very reasonable price. Orion Freedom Plus Thermal can be used with any exposing device available in the market.

Orion Freedom Plus Thermal Plates are an excellent choice for high-quality commercial printers, medium to long-run sheetfed and heatset web applications, and small format offset packaging printers. Delivering extraordinary sharp detail with resolutions up to 20-micron FM, as well as strong on press robustness, Orion Freedom Plus Thermal Plates provide stable dot and colour reproduction, helping to reduce plate remakes and job variation.

We recommend using Orion developers with Orion Plates.

Orion Freedom Plus Thermal
Plate Positive Working, Infra Rad Laser Digital Plate with wide operating latitude. Optional post-bake for long runs and resistance to aggressive press chemistry such as UV Inks and blanket washes.( Check Suitability before use)
Thickness 0.28mm. and 0.25mm
Aluminium Alloy 1050AA Litho Grade Extra Pure.
Spectral Sensitivity 830 nm
Laser Energy Required 120-150 mJ/cm 2
Suitable Exposing Devices 1) Kodak2) Screen3) Heidelberg -or any other suitable
Resolution 1% to 99% @ 250 lpi
FM Capability 20 Micron Stochastic
Plate Processor Any suitable processor for thermal plates with temperature Control and speed control
Developer Plate Type- U-1 Series Plate Colour -Blue
Developer KGSP *
OR Developer Star P U * OR ORION TPD 001*
Plate Type-T +Series-Plate Colour Green – Developer Star Dust +* OR ORION TPD 001*
Replenishment 80 ml per sq. meter.
Processing 20 to 40seconds dwell time in developer tub, @ 22-25 Degrees Centigrade +- 1 Degrees Centigrade
Baking Apply any suitable baking Gum
Run Length 25000 impressions Unbaked and 55000 baked. Actual Run Length may vary according to press, ink and paper conditions.
Safe Light Safe For Day Light Use.
Transport and Storage Store flat away from excessive heat and humidity.

Orion Thermal Developer TPD 010